Problems with extruders when producing wires and cables

1. Scratches on the cable surface: If the eye mold is scratched, replace the
eye mold in time

(1) If the wire guide wheel and wire storage rack are scratched, find the
problem point in time and adjust it immediately to solve it.

(2) Slag accumulation on the outer eye can also cause scratches. The material
should be replaced fundamentally. Secondly, the problem of scratches on the
outer eye caused by slag accumulation can be solved by increasing the extrusion
temperature and replacing the outer mold with a slightly smaller aperture
(without corridor section).

2. Extruded plastic burns

Plastic burns are common quality defects in the plastic extrusion process.
The noticeable manifestations are: the temperature display is too high; there is
a lot of smoke and strong irritating smell at the die mouth, and there is a
bursting sound in severe cases; there are burnt particles in the extruded
plastic layer; there are continuous bubbles at the glue joint; the main reasons
for the occurrence are:

(1) The temperature control is too high to reach the plastic thermal
degradation temperature;

(2) The screw has not been cleaned for a long time, and the accumulated burnt
materials are extruded with the molten plastic;

(3) The heating or shutdown time is too long, causing the plastic in the
barrel to be heated for a long time and decompose;

(4) The temperature control instrument is out of control or inaccurate,
causing high-temperature decomposition;

(5) The extruder cooling system is not turned on, causing the material to
overheat due to shear friction.

Therefore, during the production process of the extruder, it is necessary to
strengthen the inspection of whether the heating and cooling systems are working
normally; the extruder temperature setting should be based on the process
requirements and the screw speed; the heating time should be reasonably
controlled, and the extrusion system should be cleaned regularly.

3. Uneven outer diameter

Improper human control, pay attention to abnormal acceleration and
deceleration, tension of the pay-off rack and take-up wire tension, abnormal
measuring tools, etc.

www.jinhanmachinery.com
Jinghan Machinery (Dongguan) Co., Ltd.

  • Related Posts

    Chinesia Helps Global Learners Build Practical Chinese Skills Through One Connected Learning Platform
    • adminadmin
    • November 20, 2026

    Chinese learning designed for real communication Many learners can recognize Chinese words and grammar but still feel uncertain when they need to speak in real situations. Chinesia is designed to…

    Continue reading
    CRET Technology Explained: How Wash-Free Homogeneous CLIA Works
    • adminadmin
    • November 20, 2026

    Industry Background and the Diagnostic Challenge In vitro diagnostic (IVD) testing has long relied on chemiluminescence immunoassay (CLIA) systems that depend on magnetic bead separation, multiple washing steps, and complex…

    Continue reading

    Leave a Reply

    Mechanical Equipment & Tool Parts

    CNC Machining Services for Performance Hardware Brands, 2026

    • November 20, 2026

    Shenzhen Servo Motor Driver Manufacturer CNC Machining 2026

    • November 20, 2026

    CNC Machining Service Pricing and NDA Protection Explained

    • November 20, 2026

    Sports Lighting Energy Management: How to Reduce Operating Costs Without Compromising Lighting Quality

    • November 20, 2026

    Which HVDC Suppliers Balance Efficiency And Lifecycle Cost

    • November 20, 2026

    Aokai 10 mg Filter Bags: Baghouse Emission Control Quotes

    • November 20, 2026