Why is it important to choose the right flange size?

Common Misconceptions About Breast Pumps:

Many breastfeeding mothers follow trends and buy popular breast pumps, only to find they are not suitable for themselvesThe problem actually lies in the flange—most on the market come in a standard size, just like shoe sizes, but breast sizes vary from person to person. A one-size-fits-all approach simply cannot accommodate all mothers, and blindly following trends can easily lead to disappointment


Hazards of Using Incorrect Flange Dimensions:

1. Clogged milk ducts, reduced milk supply 

Choosing the wrong flange size can cause milk blockage, and if the milk is not fully extracted during pumping, it can lead to milk blockage and backflow. 

2. Red, swollen, and cracked nipples 

If the flange is too large, it can easily cause nipple and areola edema. If the flange is too small, the nipple repeatedly rubs against the inner wall, which can easily lead to nipple pain and cracking.


Correct Use of a Breast Pump: 

The stronger the suction of the breast pump, the better! Adjust from the lowest setting upwards, and if you feel pain, lower it by one level. 

This is your maximum comfortable negative pressure~ Don't force yourself to pump through the pain, as it can easily cause breast edema!


⚠️ Important Notes: 1. Before buying or renting a breast pump, be sure to accurately measure the size of your nipples 

2. The measurement should be based on the size after pumping milk. 

3. If the sizes on both sides are not the same but the difference is not significant, use the larger size as the standard. If the difference is too large, you can buy two different sizes of horn covers.

www.jxphome.com
Jiangxi Partner Home Co., LTD

  • Related Posts

    How to Become an Anti-Aging Skincare Distributor: Step-by-Step (2026 Guide)
    • adminadmin
    • November 20, 2026

    Published: November 2026 | By Qinghe Yunsheng R&D Team Six steps take you from first contact to first order: map the market, shortlist brands, collect samples and documents, verify compliance,…

    Continue reading
    Wood Moisture Content for Export Furniture: Why 8–12% Decides Your Claim Rate (2026)
    • adminadmin
    • November 20, 2026

    Published: November 2026 | By Xingfuyuan Engineering Team Keep wood between 8% and 12% moisture content at the time of packing, and keep every part in one frame within 2%…

    Continue reading

    Leave a Reply

    Mechanical Equipment & Tool Parts

    CNC Machining Services for Performance Hardware Brands, 2026

    • November 20, 2026

    Shenzhen Servo Motor Driver Manufacturer CNC Machining 2026

    • November 20, 2026

    CNC Machining Service Pricing and NDA Protection Explained

    • November 20, 2026

    Sports Lighting Energy Management: How to Reduce Operating Costs Without Compromising Lighting Quality

    • November 20, 2026

    Which HVDC Suppliers Balance Efficiency And Lifecycle Cost

    • November 20, 2026

    Aokai 10 mg Filter Bags: Baghouse Emission Control Quotes

    • November 20, 2026