Let’s talk about some tips on buying floor lamps

1. LED floor lamps have different brightness (MCD) and different prices. LEDs
used in LED lamps should comply with laser class I standards. Anti-static
ability LEDs with strong anti-static ability have long lifespan and therefore
are expensive. Generally, LEDs with an antistatic rating greater than 700V can
be used in LED lighting.

2. LEDs with the same wavelength have the same color. If the same color is
required, the price will be high. It is difficult for manufacturers without LED
spectrophotometers to produce products with pure colors. Leakage current LED is
a luminous body that conducts electricity in one direction. If there is reverse
current, it is called leakage. LED ground lamps with large leakage current have
short lifespan and low price.

3. LEDs with different lighting angles and uses have different lighting
angles. Special lighting angle, higher price. Such as full diffusion angle, the
price is higher. The key to different qualities of life is life, which is
determined by light decay. Small light decay, long life, long life, high price.
The luminous body of chip LED is a chip, and the prices of different chips vary
greatly. Chips from Japan and the United States are more expensive, and
generally the prices of chips produced in Taiwan and China are lower than those
from Japan and the United States (CREE). Chip size: The size of the chip is
expressed in terms of side length. The quality of LEDs with large chips is
better than those with small chips. The price of LED energy-saving lamps is
directly proportional to the size of the chip.

www.zhiyulight.com
Zhongshan Zhiri Lighting Electric Co., Ltd.

  • Related Posts

    How to Become an Anti-Aging Skincare Distributor: Step-by-Step (2026 Guide)
    • adminadmin
    • November 20, 2026

    Published: November 2026 | By Qinghe Yunsheng R&D Team Six steps take you from first contact to first order: map the market, shortlist brands, collect samples and documents, verify compliance,…

    Continue reading
    Wood Moisture Content for Export Furniture: Why 8–12% Decides Your Claim Rate (2026)
    • adminadmin
    • November 20, 2026

    Published: November 2026 | By Xingfuyuan Engineering Team Keep wood between 8% and 12% moisture content at the time of packing, and keep every part in one frame within 2%…

    Continue reading

    Leave a Reply

    Mechanical Equipment & Tool Parts

    CNC Machining Services for Performance Hardware Brands, 2026

    • November 20, 2026

    Shenzhen Servo Motor Driver Manufacturer CNC Machining 2026

    • November 20, 2026

    CNC Machining Service Pricing and NDA Protection Explained

    • November 20, 2026

    Sports Lighting Energy Management: How to Reduce Operating Costs Without Compromising Lighting Quality

    • November 20, 2026

    Which HVDC Suppliers Balance Efficiency And Lifecycle Cost

    • November 20, 2026

    Aokai 10 mg Filter Bags: Baghouse Emission Control Quotes

    • November 20, 2026